HomeNewsArticle Display

JSTARS design fixture tool, saves Air Force estimated $500K yearly

U.S. Air Force Staff Sgt. Quinn Smith, a sheet metal technician with the 116th Air Control Wing aircraft structural maintenance section, Georgia Air National Guard, explains the capabilities of the newly-created cowling fixture table April 3, 2019, at Robins AFB, Ga.

Staff Sgt. Quinn Smith, a 116th Air Control Wing aircraft structural maintenance section sheet metal technician, Georgia Air National Guard, explains the capabilities of the newly-created cowling fixture table April 3, 2019, at Robins Air Force Base, Ga. Eight Airmen from the Joint Surveillance Target Attack Radar System team recently designed an innovative tool estimated to save the Air Force nearly $500,000 a year in cowling repairs for the aircraft. (U.S. Air National Guard photo by Tech. Sgt. Nancy Goldberger)

ROBINS AIR FORCE BASE, Ga. (AFNS) --

Eight Airmen from the Joint Surveillance Target Attack Radar System maintenance team at Robins Air Force Base, Georgia recently designed an innovative tool estimated to save the Air Force nearly $500,000 a year in cowling repairs for the E-8C Joint STARS aircraft.

The cowling fixture table, an approved tool intended for field-level repairs, was a response to a challenge set by leadership.

“The supply system could not meet the demand requirements for these cowlings,” said Col. Robert Nash, Georgia Air National Guard, 116th Maintenance Group commander. “We needed a sufficient capacity to support the warfighter.”

The cowling — the metal covering of the engine — is an integral part of an aircraft, and replacing a cowling comes at the tune of $80,000 per set.

“A bad cowling throws off the aerodynamics and could cause further damage,” said Master Sgt. Ryan Page, 116th Air Control Wing aircraft structural maintenance section supervisor.

Since a warped cowling renders the housing unsafe, close-enough isn’t a fix and the set would be turned in as unserviceable. One of the biggest advantages of the fixture is the ability to fix bent corners of the engine cowling with precision. The table includes a hydraulic press and measuring grid accurate to one-eighth inch, according to the structural maintenance technicians.

In addition, the maintenance table saves maintainers’ man-hours by doing multiple repairs on a cowling at the same time, enabled by the jig holding it in place. This translates to saving the 16 JSTARS and their crews from unplanned downtime when the aircraft are constantly needed for real-world missions, training and planned maintenance.

The table started merely as an idea, a desire for improvement during a meeting of the minds, the Airmen said.

“The professional skill set of the team enabled us to take one person’s vision and create something practical,” Page said.

The cowling fixture operators noted the more secure and safer benefits of using the table.

“The whole machine is adjustable,” said Staff Sgt. Quinn Smith, 116th Aircraft Structural Maintenance Section sheet metal technician, admiring the handiwork of his teammates. “It’s pretty ingenious.”

Airmen from the structural maintenance section went to their Guard and active-duty comrades in the aircraft metals technology section to discuss their needs. The metal experts designed and built it in a week, based on a description and list of requirements.

“That job was the culmination of every skill we use,” said Tech. Sgt. Luke Kessinger, 116th Aircraft Metals Technology Section craftsman and lead metals technician for the project.

Using refurbished items, the team built the table for about $400 according to Kessinger.

It would have cost around $300,000 to have a similarly capable table made by contractors, Page said.

Every detail they could think of was accounted for and tested on the table.

The design even took into account the finer details, such as the vitally important need to protect the rivet heads, noted Airman 1st Class Joseph Pierce, 116th Aircraft Structural Maintenance Section sheet metal technician.

As good as it is, the table is still being improved as it’s put into practice. And the Airmen will have plenty of practice.

The cowling issue has plagued the JSTARS mission for years and has been one of its biggest weak points, according to Nash. Since the problem couldn’t be solved on the supply side, it was maintenance that took up the slack, extending the life of the cowlings on hand.

“What good maintainers do is attack their weakness, and they make it their strength,” he said. “The mentality these maintainers have is that no matter what their circumstances are, they are never out of the fight. They are going to figure out how to make it, build it or otherwise produce it.”

Innovations such as the cowling fixture is one of many from able-minded, skilled professionals across the Air Force.

If a commander wants innovation, the people need the funding and time to find better ways of doing things, according to Nash.

“At the end of the day, when you put all this together — the ingenuity, the resourcing and the time — the dividends on the backside of that are huge,” Nash said. “You’ve got to put your money where your mouth is.”

Engage

Facebook Twitter
RT @AF_SBIR_STTR: About 20 or 30 companies will be selected to compete for up to $40 million at the Air Force Pitch Day for Space, planned…
RT @AFmuseum: Special thanks to TSgt.(Ret.) Richard Tung & his family for visiting! Tung was assigned to the 491st bomb group(h), 853rd Squ…
It's #NationalAviationDay! ✈️ #USAF has been a part of #aviation since its inception September 18, 1947. The… https://t.co/ESPaIUaJ1m
.@TeamEglin #Airmen drive innovation, increasing safety while saving money. https://t.co/xo30mkcHMg
RT @AFSpecOpsCmd: Callie is chillin’ with our CSAF 😎 @GenDaveGoldfein meets Callie, the only search-and-rescue dog in the @DeptofDefense,…
RT @AP_Top25: Secret's out on hard-hitting Air Force linebacker Kyle Johnson: He plans to attend graduate school, go through special forc…
Staff weather officers (SWO) from the 3d Weather Squadron were put to the test during a certification field exercis… https://t.co/wcGL2Dr2a1
RT @INDOPACOM: Man’s best friend is also his best protector, but even #MilitaryWorkingDogs need to retire eventually. The service members o…
RT @USAFHealth: Airmen with the 375th AES were headed to Travis AFB for a training mission, when a passenger on-board their commercial flig…
RT @AFW2: The @AFW2 just returned from the first-ever Warrior Care Event at USAFE! #Warriors are ready to repeat that sucess & build off th…
RT @USNationalGuard: On a frigid commute to work one morning, Master Sgt. John Lawrence, of the @OKGuard, approached a vehicle resting side…
RT @USAFRecruiting: Being a part of the @usairforce means to be a part of a total force. Join us LIVE on Wednesday at 2 p.m. CT to learn mo…
RT @PACAF: The closing ceremony for Pac Angel 19-3 #Mongolia brought together members from the U.S. military, Mongolian Armed Forces, @AusA
RT @GenDaveGoldfein: Commander @PACAF Gen Brown & I just arrived in #Vietnam. What an honor to be here. We look forward to meeting Amb Krit…
RT @HQ_AFMC: Congrats to @HAFB for winning a @ENERGY award for #energy efficiency! From facility improvements to solar arrays, the teams at…
RT @AF_TFXC: Training camp is underway for Air Force Cross Country. Tonight, the upperclassman received their #CommitmentKits, symbolic of…
RT @USAFHealth: Lt. Col. Glenn Mandeville's commitment to his community goes beyond his Air Force service and into his everyday life as a g…
RT @AFResearchLab: No, you're not looking through The Predator's helmet, this is a simulated residual stress field due to multi-shot laser…
RT @CoachTimHorton: Congrats to my mentor and former ⁦@AF_Football⁩ Coach ⁦@FisherDeBerry⁩ on being named the recipient of the 6th annual T…
RT @DeptofDefense: Friday reflection. @usairforce airmen prepare to wash an A-10 Thunderbolt II at Davis-Monthan Air Force Base, Ariz. The…